Products
Products

We supply full-category shock absorber components, including pistons, stampings, rubber seals, piston rods, springs, and self-developed banding/grooving machines.

Bearing Embedded Integrated Vulcanized Strut Mount
  • Bearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut Mount
  • Bearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut Mount
  • Bearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut Mount
  • Bearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut Mount

Bearing Embedded Integrated Vulcanized Strut Mount

The Bearing Embedded Integrated Vulcanized Strut Mount from XIAYI combines precision bearing positioning with integrated rubber vulcanization to improve steering smoothness, assembly consistency and suspension NVH performance. Designed for passenger cars, new energy vehicles and light commercial vehicles, it reduces assembly variation and structural instability found in traditional split mounts.

For suspension system manufacturers, the performance of a strut mount is not determined only by rubber elasticity or bearing durability. Assembly accuracy, steering response, installation efficiency and batch consistency are equally important, especially for passenger cars and new energy vehicles with increasingly strict NVH and handling requirements.

The Bearing Embedded Integrated Vulcanized Strut Mount from XIAYI is designed around these practical requirements. Instead of assembling the bearing, rubber body and metal components separately, the bearing is accurately positioned inside the rubber structure before integrated vulcanization. This reduces the number of assembly interfaces and creates a compact component with controlled positioning accuracy.

Bearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut MountBearing Embedded Integrated Vulcanized Strut Mount

Engineering Design for Suspension Integration

Embedded Bearing Positioning

The Bearing Embedded Integrated Vulcanized Strut Mount is pre-positioned before the vulcanization process, allowing its relationship with the rubber and metal components to be controlled during molding rather than relying entirely on subsequent manual assembly. This design reduces potential installation deviation and helps maintain stable axial positioning during vehicle operation.

For suspension manufacturers, the integrated structure can also simplify component handling and reduce the number of separate parts that need to be aligned during final assembly.

Integrated Rubber and Metal Structure

During vulcanization, the rubber body and metal structure are formed into a unified component around the embedded bearing. This reduces independent interfaces within the assembly and provides a more compact load-transfer path between the shock absorber and vehicle body.

The resulting structure is suitable for suspension systems where repeated steering movement, vertical loading and road vibration occur simultaneously.

Controlled Bearing Rotation

A properly positioned bearing is important for smooth steering movement. XIAYI controls bearing positioning during molding to reduce eccentricity and unwanted resistance. This helps minimize friction-related noise and irregular rotational behavior during steering.

For vehicle manufacturers, more stable bearing movement can contribute to consistent steering feel and improved suspension NVH performance.

Installation Efficiency & Production Compatibility

Reduced Assembly Steps

Traditional split strut mounts require separate handling and positioning of multiple components. The integrated construction reduces the number of independent components that need to be assembled at the vehicle production stage.

This can help OEM and Tier 1 customers simplify material handling and reduce potential assembly variation, particularly in high-volume production environments.

Consistent Installation Reference

Because the bearing and rubber structure are integrated during manufacturing, the finished component provides a more consistent assembly reference. This reduces the possibility of variation caused by incorrect bearing positioning or inconsistent component matching during installation.

For customers operating automated or semi-automated assembly lines, consistent component geometry can also support more stable production processes.

OE-Oriented Customization

XIAYI can adjust rubber hardness, bearing specifications, metal structure and dimensional parameters according to suspension system requirements. The product can therefore be developed according to different vehicle platforms rather than relying on a single standard configuration.

This approach is particularly useful for OEM customers that require customized suspension characteristics while maintaining stable production quality.

Performance Verification for Real Suspension Conditions

Steering and NVH Evaluation

Suspension mounts experience more than simple vertical compression. During real vehicle operation, steering movement, road impact and vibration can act on the component simultaneously.

XIAYI evaluates the integrated structure under representative suspension conditions, focusing on bearing rotation, structural integrity, rubber deformation and abnormal noise. This provides customers with performance information closer to actual vehicle operating conditions.

Fatigue and Environmental Testing

The Bearing Embedded Integrated Vulcanized Strut Mount is designed for repeated loading over extended operating periods. Testing can include fatigue cycling, temperature exposure, compression performance and bonding verification to identify potential structural changes before mass production.

The supplied data indicates that the integrated structure has completed 1.2 million fatigue cycles without structural failure, supporting its application in long-life suspension systems.

Dimensional Inspection

Dimensional consistency is controlled throughout production. Bearing centricity is maintained at ≤0.05 mm, while dimensional tolerances are controlled according to the customer's drawing and assembly requirements.

This helps reduce installation interference, excessive clearance and inconsistent suspension geometry caused by component dimensional variation.

Supply Stability for OEM & Tier 1 Buyers

IATF 16949:2016 Quality Management

XIAYI operates under an IATF 16949:2016 quality management system, with process controls covering raw materials, molding, vulcanization, bearing positioning, finishing and final inspection.

This provides a structured quality framework for customers requiring traceable manufacturing and repeatable production performance.

PFMEA-Based Process Control

Potential risks are identified throughout the manufacturing process using PFMEA-based control methods. Key risks such as bearing positioning deviation, incomplete vulcanization, dimensional variation and bonding defects can therefore be addressed before products reach final assembly.

For buyers, this reduces the dependence on end-of-line inspection alone and supports more predictable batch quality.

Stable Mass Production

The integrated manufacturing process is suitable for customers requiring repeated deliveries of the same specification. Automated process control and dimensional inspection help reduce variation between production batches.

This is especially important for suspension component suppliers managing long-term OEM programs where consistent fit and performance must be maintained across different production lots.

Core Performance Parameters

Parameter XIAYI Standard Buyer Benefit
Bearing Centricity ≤0.05 mm More stable rotational behavior
Rubber Hardness 60±5 Shore A Balanced support and damping
Compression Set ≤10% Reduced permanent deformation
Bonding Strength No delamination under 5 MPa tension Stable integrated structure
Operating Temperature -40℃ to 120℃ Suitable for broad environmental conditions
Fatigue Resistance 1.2 million cycles Long-term structural durability
Inner Diameter Tolerance ±0.1 mm Controlled assembly fit
Height Tolerance ±0.5 mm Consistent installation dimensions

Application Compatibility

Passenger Cars and New Energy Vehicles

The integrated design is suitable for suspension systems where steering smoothness, cabin comfort and low NVH are important. It can be adapted for different passenger car and EV suspension configurations according to the customer's technical drawings.

SUVs and Light Commercial Vehicles

SUVs and light commercial vehicles can generate higher suspension loads because of vehicle weight and different road conditions. The integrated structure provides stable support while maintaining controlled bearing movement.

OEM and Aftermarket Programs

For OEM and professional aftermarket customers, XIAYI can provide customized dimensions, rubber characteristics and bearing configurations according to application requirements, helping customers maintain compatibility with existing suspension assemblies.

Real Application Case

A domestic new energy passenger vehicle parts supporting enterprise had long been troubled by quality defects in traditional split strut mounts. The split assembly structure of ordinary products led to bearing positioning deviation and assembly gaps. During vehicle assembly and road testing, vehicles were prone to obvious steering abnormal noise and slight chassis jitter on bumpy roads. In addition, uneven vulcanization caused partial rubber delamination and cracking after 4--6 months of use, resulting in a product after-sales failure rate of 2.8%.

After fully switching to Bearing Embedded Integrated Vulcanized Strut Mount, these quality problems were significantly reduced. Through embedded bearing positioning and integrated vulcanization, the component achieved a more consistent relationship between the bearing, rubber body and metal structure. Supported by XIAYI's constant-temperature curing process and PFMEA-based quality control, the product maintained stable dimensional accuracy and structural integrity during testing.

Verified through real-vehicle road tests and 1.2 million fatigue cycles, the strut mount maintained smooth rotation and stable structural performance. The customer's assembly yield increased from 96.2% to 99.8%, while the after-sales failure rate decreased to 0.03%. The customer subsequently adopted XIAYI as a designated long-term supplier for its new energy vehicle suspension top mount program.

Product FAQ

How does the integrated structure help vehicle assembly?

Traditional split products require several components to be positioned and assembled separately. The integrated design combines the bearing and rubber structure during manufacturing, reducing the number of independent assembly interfaces and helping improve installation consistency.

Can the strut mount be customized for different vehicle platforms?

Yes. XIAYI can customize bearing specifications, rubber hardness, metal dimensions and overall geometry according to customer drawings, suspension requirements and target vehicle characteristics.

What quality controls are used during production?

XIAYI operates under an IATF 16949:2016 quality management system and applies process monitoring, PFMEA-based risk control, dimensional inspection and performance testing throughout production. This helps maintain stable quality for repeated OEM orders.

Custom OEM Development & Supply

XIAYI supports customized development based on customer drawings, samples and suspension system requirements. Bearing specifications, rubber hardness and component dimensions can be adjusted for different vehicle platforms. Before mass production, prototype testing helps verify assembly compatibility and key performance, while standardized production processes ensure consistent quality for long-term OEM supply.

Send Inquiry
Contact Info

Get a Tailored Quote for Your Shock Absorber Parts

Why Global Buyers Choose Ningbo Xiayi:
✓ IATF 16949 Certified — Defect rate strictly controlled below 0.1%.
✓ Full-Category Supply — Pistons, rods, springs, stampings & rubber parts.
✓ R&D Support — Custom powder metallurgy formulas & 7-10 day rapid prototyping.
✓ Proven Capacity — 50 million core pistons produced annually for global OEMs.

Ready to start? Complete the form below and our engineering team will respond within 24 hours with a custom recommendation.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept